ASL FAQ

Advanced Squad Leader
Frequently Asked Questions

PART 5


INTRODUCTION PART 1 PART 2 PART 3 PART 4 PART 5

[12.0]Specific ASL rules
[12.01]How does a Human Wave work?
[12.02]How does bocage work?
[12.03]CX and leader movement bonus
[12.04]Moving vs. Motion etc.
[12.05]Assault move and laying SMOKE
[12.06]Area Target Type vs. Area Fire
[12.07]Do mortars get ROF with SMOKE?
[12.08]Infantry Target Type CHs
[12.09]Building vs. Location vs. Hex Control
[12.10]Why do the concealment markers have a morale level printed on them?
[12.11]Do I have to declare it when my opponent rolls his SAN?
[12.12]Can a leader direct fire when he can't use his DRM?
[12.13]What does "momentarily reveal" mean?
[12.14]Can I dm a weapon and still move?
[12.15]OBA confuses me! How can it be made simpler?
[12.16]What is that thing on Board 8?
[12.17]The centre dots on my board aren't in the centre of the hexes! What do I do?
[12.18]The rules say I can HIP my foxholes. Does that mean the units in the foxhole are HIP also?
[12.19]Can I remove CX by declaring TI?
[12.20]What is "VBM Sleaze"?
[12.21] When is CC "simultaneous"?
[12.22] Is "No Quarter" always applied to both sides when in effect?
[12.23] Must I use my MGs when making a SFF attack?
[12.24] OVRs confuse me! How can it be made simpler?
[12.25] Heroic Leaders
[12.26] Half-Squads and Smoke Grenades

[12.0] SPECIFIC ASL RULES QUESTIONS

While the ASLRB generally hangs together surprisingly well, certain rules sections have become (in)famous for defying logic or common understanding. This part of the FAQ attempts to clarify some of these more obscure rules.

[12.01] How does a Human Wave work?

Ever since the ASLRB was first published, the rules on Human Waves were something of a mystery to many players; they depended on important concepts that were only vaguely described, and seemed to leave many holes open. Fortunately, this situation has now been resolved with the publication of DB: the updated Chapter A pages supplied in that module provide completely rewritten Human Wave (A25.23) rules that, while a little mechanical in operation, are nevertheless unambiguous.

So what's with the red and white HW counters? It isn't explicitly stated in the ASLRB what the different colours signify. The red HW counters are used while the HW is moving; when the MPh is over, the red counters should be replaced by the white ones, to show that although they're no longer in a Wave, they still get the ML benefit (and the Lax penalty). Since these are standard colour-coded (red printing on white background) these are removed at the end of the CCPh, like Pin, TI, etc.

The Japanese Banzai counters work in the same way; the red counters are used while the banzai unit(s) are moving, and then flipped to their white side when their MPh is over, and finally removed at the end of the turn.

[12.02] How does Bocage work?

Bocage is weird terrain in many ways. Most of it is straight-forward (TEM, movement restrictions, etc.) but where many people become lost is in the interaction of Bocage and LOS. Closely tied in with this is the application of the Wall Advantage rules to Bocage.

When a unit is in non-open Ground behind a Bocage hexside, it can theoretically Prep Fire at opposing units through the Bocage and then become immune to Defensive Fire by claiming the TEM of the non-Open Ground terrain in its hex and dropping out of enemy LOS. This seems patently unfair and against the spirit of several rules (reciprocal LOS, "no free lunch", etc.) to some, but others have noted that Bocage was tremendously good defensive terrain and the designers may indeed have intended the rule to play as it seems to read. Indeed, 1st Edition Q&A ('97 Annual) confirmed this.

The Wall Advantage and Bocage rules were rewritten for the 2nd Edition rulebook. An excellent article in J3 by Ian Daglish gives historical background on Bocage, and goes through these "new" rules in detail. J3 also included a summary by Bruce Probst of the "new" Wall Advantage rules. Overall, little has been changed, but much has been clarified in the new edition.

The important thing to note when playing a scenario with Bocage, under either rules edition, is *when* a unit can claim WA. The simplest way to interpret the rule is that you always have WA vs. an adjacent hedge/wall/bocage hexside unless there is something to prevent this. Note that you can claim WA even when there are no adjacent enemy units forcing you to make the claim. With Bocage, if you don't have WA, you don't have LOS to a non-adjacent enemy unit through the Bocage. Hence, if you lose WA, you can suddenly drop out of LOS. Note, however, that once WA is lost, it may not be easy to claim it again. Especially note that you can't exactly claim/drop WA "at will"; once you voluntarily drop it, it stays dropped for the rest of the player turn. You must also decide whether a unit will keep or drop WA *before* any attacks are declared against that unit.

Finally, note that Bocage makes it easy to keep and gain Concealment; a unit can move, rally, recover weapons, etc. behind Bocage and not lose concealment, and a unit behind Bocage can almost always gain Concealment automatically.

Hence, ASL combat involving Bocage should become a "cat and mouse" affair, with units on both sides revealing themselves and then concealing themselves with frightening speed, and units never being quite sure what lies in wait a couple of hexes away.

[12.03] CX and leader movement bonus

See the 96 Annual. It has an excellent article on this very subject.

[12.04] Moving vs. Motion etc.

Again, see the 96 Annual.

[12.05] Assault move and laying SMOKE

Yes, you can roll for SMOKE grenades as part of Assault Movement. A unit is Assault Moving if (a) it declares that it is doing so before expending any MF and (b) it moves no more than one location while expending less than it's normal full allocation of MF. Within those restrictions, you can do anything and still be Assault Moving -- SMOKE grenades, DC placement, SW recovery, etc. Note that (of course) you can't declare CX and Assault Movement at the same time.

[12.06] Area Target Type vs. Area Fire

These are easy terms to confuse, but they are separate concepts and actually refer to different things.

Area Target Type is an Ordnance TH procedure. MTRs always fire with ATT, and any weapon attempting to lay SMOKE must also use the ATT. Otherwise, use of ATT (as opposed to Vehicle Target Type or Infantry Target Type) is optional. Use of ATT consumes all of a unit's available ROF [EXC: MTR fire], and, if a hit is secured, the normal FP of the attack is halved. The advantages of ATT are that it's often easier to obtain a hit, at the penalty of reduced attack effectiveness. ATT is also the only way to gain acquisition against a concealed target.

Area Fire refers to any circumstance that causes your normal FP to be halved, e.g., firing at a concealed unit, firing in the AFPh, firing at long range are all examples of Area Fire. Ordnance is affected by Area Fire differently; it must add +2 to the TH DR, but if it hits, it attacks at normal strength *for the chosen Target Type*. Note that this means that *if* you are using the Area Target Type vs. a concealed target, you will have a +2 TH DRM *and* attack at half strength.

[12.07] Do mortars get ROF with SMOKE?

Yes they do. MTRs are the only weapon type that can maintain ROF when using the Area Target Type. Since the ATT is always used when firing SMOKE, MTRs may fire SMOKE and keep ROF.

As a point of trivia, this was not the original intention behind the SMOKE rules. However, so many people were playing it this way that TAHGC felt that it would be counter-productive to issue errata to stop the tactic. Hence, MTRs are valuable SMOKE-producers in the game.

[12.08] Infantry Target Type CHs

Scoring an Infantry Target CH is great fun. You get to double your FP and reverse the protective TEM, making it very easy to cause damage to your opponent's forces. However, it is easy to play this rule incorrectly. When firing at the Infantry Target Type, you score a CH if your modified DR is less than half of your modified TH #.

Note the distinction between "modified DR" and "modified TH #". Usually the only thing that will modify the TH # is range, as modified for short or long gun barrels, etc. On the other hand, there are many DRMs that can apply -- TEM being the most common. You must remember to add the DRMs to the DR, *not* to the TH #.

E.G.: A gun Prep Fires at an infantry target in a wooden building at a range of three hexes. No modifiers apply at that range to change the TH #, so it remains at "8". Thus, a CH will occur if the modified DR is less than 4. What modifiers apply to the DR? In this example, only the TEM for the building, +2. Hence it is not possible to score a CH, since the lowest possible DR is "4". [EXC: if you roll an original "2", you may still score a CH if a subsequent dr is 1, or is less than half the modified TH number. Thus, in this example, an original DR of "2" followed by a subsequent dr of "3" or less will be a CH.]

Now let us assume that the gun in the above example keeps ROF. The second shot will now qualify for a -1 acquisition DRM, hence the total DRM is now +1, making a CH automatic on a DR of "2".

If the gun keeps ROF again, it now has a -2 acquisition DRM. Therefore the total DRM are 0 and a CH will occur on a DR of "3" or less.

Note that none of the modifiers in these examples altered the basic TH # in any way -- they only applied to the DR. A lot of people make the mistake of modifying the TH # according to the DRM -- e.g., if the total DRM were +2, they would subtract that from the TH # and think they get a CH if they roll under "3" (if the basic TH # were 8). In fact, as the first example above shows, even rolling a "2" is only a *possible* CH when the total DRM is +2.

Finally, remember that a CH will usually only affect a single target in the location (determined by Random Selection). Other targets in the location are only affected by a normal hit. Also, the chance to Rubble or Burn a location is not affected by scoring a CH.

[12.09] Building vs. Location vs. Hex Control

The important thing to remember here is that *different* requirements apply to the different forms of Control. You may succeed in controlling a *building* but that does *not* automatically give you control of the *Locations* in that building. The reverse is usually also true. E.G., suppose an enemy squad is in a building that you want to control. You fire at it and break it, and then move in with a squad of your own. You do not yet control the *building*, because the presence of the enemy unit -- even if broken -- is sufficient to deny you control. However, you do now control the *hex* that YOUR squad moved into (and also the *location* -- remember that a single building hex may have several locations).

Always read the scenario VC carefully. If you have to control a *building*, then you must completely clear the enemy units out of that building, and have one of your armed Good Order MMCs enter the building to win. If on the other hand you need to control only a particular *hex* of a building, then it doesn't matter how many other units may be elsewhere in that building -- if your units are the only ones in that hex, that's good enough.

Note that the updated Chapter A pages supplied in DB have substantially rewritten (for clarity) rules on controlling Buildings, Hexes and Locations.

[12.10] Why do the concealment markers have a morale level printed on them?

The usual application of the Dummy ML level of 7 is when an "unbroken" vehicle (see A12.1) enters a hex containing a a concealed unit (without using VBM). You must pass a PAATC to remain concealed. If the stack being attacked is a dummy stack, then it uses the Dummy ML of 7 to see if they pass the PAATC. The Dummy ML is also used when dummy stacks undergo a Bombardment MC.

[12.11] Do I have to declare it when I roll my opponent's SAN?

A short answer: yes, according to unofficial Q&A from MMP.

More generally, this is a tricky one. With most rules in the ASLRB, if you forget to apply them, too bad, what's done is done. You don't have to point out that your opponent has kept ROF with his MG, for example; if he doesn't notice it, that's his fault for not being observant enough. SAN can be interpreted slightly differently, however. The relevant rule does not say that SAN is an *optional* attack; the implication is that if the SAN is rolled, a SAN attack *must* take place, and any player who notices this should point it out.

Not everyone follows this interpretation, though. In practice, it becomes a personal style of play. It's a "gentlemanly" thing to do; some opponents may admire you for it, others may think you're a schmuck. Play it in whatever way makes you comfortable; discuss it with your opponent before the game starts if you think it might become a source of contention.

More generally, this question could be categorised as "what make good ASL ethics?" Not all players have the same feelings on these topics, and some players even play differently depending on whether they're playing in a friendly game or are trying to win a tournament. If your opponent's style of play makes you uncomfortable, talk to him about it and see if you can come to an agreement. It *is* just a game after all, and the primary purpose of playing ASL is to have fun!

[12.12] Can a leader direct fire when he can't use his DRM?

Generally, no. There are some specific exceptions (e.g., a leader may direct the fire of a FT to prevent cowering, even though his DRM cannot affect the outcome) but such exceptions are clearly marked in the ASLRB. Said exceptions aside, "directing fire" and "applying leadership DRM" are synonymous for all purposes.

[12.13] What does "momentarily reveal" mean?

Rule A12.14 in the 1st Edition rulebook uses the concept of "momentarily revealing" a concealed unit to strip concealment from an enemy unit in LOS. The concept is that you must prove to your opponent that you have a real unit that can see the enemy unit. There is some dispute amongst ASL players as to what defines that "proof".

Reading the rule literally indicates that you must remove the unit's concealment marker, allowing your opponent to see the real unit, and then replace the concealment marker. Some players think that it's sufficient to show just enough of the counter to prove that it's genuine, without revealing the actual strength factors involved. Still others feel that a statement to the effect of "I have a real unit in this stack" is sufficient.

However, the 2nd Edition is clearer: "... [the viewing] unit must completely forfeit its "?" momentarily ...". To "completely forfeit" Concealment is to confer Right of Inspection - as long as your opponent also has a unit in LOS - so this means you have to reveal a unit in full, and its possessed SW, to your opponent.

Having said that, players who like Fog of War and/or are comfortable with an Honor system are free to continue to use a verification method of their choosing that is acceptable to their opponent and agreed to in advance.

[12.14] Can I dm a weapon and still move?

No. The rules are not crystal-clear on this matter, so it is understandable that some people may play this incorrectly, but "using" a weapon is sufficient to mark it with a "Prep Fire" counter, and dismantling (or reassembling) is a form of use. Similarly, you could not deliberately malfunction a weapon (which requires a fire action) and then move.

[12.15] OBA confuses me! How can it be made simpler?

I'm glad you asked! ASL Action Pack #1; in addition to the scenarios and new boards that it contains, included an "OBA flowchart" that covers in detail all the steps required to implement OBA. (It also includes several very important Rules Q&A concerning OBA.) The chart helps to explain the complex OBA procedure, and after a little bit of practice you should find that the necessary steps are easily implemented (and in the correct sequence too).

This chart (less the Q&A) was reprinted in the 2nd Edition Rulebook; the Q&A was incorporated into the new rules themselves, if appropriate.

There are a couple of different flowcharts available for free download from ftp sites, but it is the FAQ editor's opinion that the "official" chart is more comprehensive, more accurate and easier to use than the "free" alternatives that he has seen. Note that there was errata for the AP1 chart (see '97 Annual).

[12.16] What is that thing on Board 8?

Assuming you mean the object in hexes V6-W6, it's a castle (a little one). It is generally assumed to be of stone construction and two levels (0 and 1) since it is a multi-hex building with no explicit stairwell. Board 8 (and also boards 6 and 7) are somewhat notorious for featuring buildings of indeterminate construction. If an SSR doesn't specify the building types, rule B23.3 comes into effect.

[12.17] The centre dots on my board aren't in the centre of the hexes! What do I do?

Rule A6.1 specifies that LOS is (usually) measured from the centre of one hex to the centre of another. It doesn't actually refer to the centre dots at all. So the "correct" thing to do is to ignore the dot when it's obviously off-centre and use the "true" centre of the hex (which can be easily found by pencilling in a couple of intersecting lines).

In practice many people just follow the centre dots regardless. It's a style-of-play thing; as long as both you and your opponent agree on whatever method you want to use, it doesn't matter how you do it.

Note that in PBM and PBEM play, you will not have any idea what the boards your opponent is using look like. Unfortunately, not all boards are created equal, and a clear LOS on your set of boards may be blocked on your opponent's. In such cases it is probably best to resolve the situation by dr, as per A6.1. Calling for third opinions is unlikely to be useful, since these will involve a different set of boards again.

[12.18] The rules say I can HIP my foxholes. Does that mean the units in the foxhole are HIP also?

Generally, no. The relevant rule is A12.33, and it's pretty specific that it's *only* the Fortification that is HIP. (There is of course an exception: Pillboxes (B30.7).) Note that a HIP fortification loses its HIP status very easily; if you place HIP units in a HIP foxhole, for example, the enemy units will see the foxhole quite easily, which can compromise the "surprise" value of the HIP units IN the foxhole. (They're not revealed, but your opponent can guess the foxhole is there for a reason.) Note that at Night (E1.16) or in certain Pacific terrain types (G.2) hidden fortifications are more difficult to reveal, and thus placing HIP units in such locations can have greater tactical value.

[12.19] Can I remove CX by declaring TI?

A4.51 (Counter Exhaustion) is phrased a little poorly in the sentence that describes how CX status is removed. Many people interpret the last clause of the sentence that begins "A unit's CX counter is removed ..." as being immediately effective, i.e., if you become TI in the turn that you declare CX, you will immediately lose the CX counter. (A way of doing this would be to declare a Search attempt (A12.152) even when you know there is nothing to find.) However, recent unofficial Q&A from MMP has clarified that *every* clause in this sentence after "... in its next Player Turn ..." is only applicable to that condition (i.e., the *only* way to lose CX status in the same turn that you incur it is to break).

[12.20] What is "VBM Sleaze"?

An extremely common (and valuable) tactic that a surprising number of players have never heard of or used. Once it's been used against you though, you never forget it!

A7.212 says that if an enemy unit [EXC: unarmoured vehicles] is in the same Location as you are, you cannot fire at any enemy unit *not* in your Location - NO MATTER HOW INVULNERABLE THE ENEMY UNIT IN YOUR LOCATION MIGHT BE. The "AFV Sleaze" is to so place AFVs in bypass of your defensive locations to prevent your infantry from firing at infantry units moving up behind the AFV. It can be extremely frustrating to see lots of juicy infantry targets go strolling by and the presence of a single tank parked outside your window completely negates your ability to do anything about them. (Note that the AFV need not be literally "parked" - it can be Motion and still have the same effect.)

So what makes it a "sleaze"? Because you didn't think of it first, mainly. It's a perfectly legitimate tactic under the rules. Is it "realistic"? Maybe, maybe not, but that's hardly relevant - we're playing ASL here, remember (see [4.1] for a discussion of "reality arguments" and their ultimate pointlessness).

Note that the "sleaze" is not necessarily all good news for the AFV owner. If you can set up your defense properly, the enemy may need a lot of AFVs to completely negate your defense. AFVs in bypass of a location are vulnerable to Street Fighting. And an AFV that's pinning your troops in the "Sleaze" is not running around in your rear areas, cutting off Rout paths and firing at your units.

Finally, note important Q&A from the '92 Annual that says units in upper levels of buildings can only be "Sleaze-freezed" if the AFV is OT and/or CE - and of course an AFV in such a position is particularly vulnerable to fire from your "frozen" units.

[12.21] When is CC "simultaneous"?

Despite what it says in A11.1, Close Combat is, in practice, *never* simultaneous - and awareness of this is essential to gaining a clearer understanding of the CC "Infiltration" rules.

The rules cite several examples of "unusual" situations where CC is not simultaneous: Ambush, CC vs. vehicles and Prisoners attacking their Guards. However, the important case here is "Infiltration" (A11.22) where either or both sides roll a "2" or a "12". It is a common misconception that whichever side rolls a "2" "goes first". (Or a "12" means that side "goes last".) THIS IS NOT THE CASE.

The truth of the matter is that (barring Ambush etc.) the ATTACKER always rolls his CC dice first (A11.12), which means that his CC results always apply, *even if* the DEFENDER rolls a "2". The reverse is NOT true; if the ATTACKER rolls a "2", he may eliminate the DEFENDER (or withdraw) without the latter even getting a chance to roll at all.

In other words, despite the "usual" "simultaneous" nature of CC, the ATTACKER always has a slight edge in CC, and the DEFENDER should not make his CC DR until the ATTACKER's DR has been seen. (This is even more important if the ATTACKER rolls a "12", since the option to withdraw must be taken before the DEFENDER makes a CC attack.)

Note that either side rolling a "2" in CC may result in Field Promotion (A18.12) which in turn may change the odds of the CC (in which case the odds must be recalculated). If the ATTACKER has still rolled low enough though, a newly-generated Leader may end up dying with his DEFENDER squad just the same -- effectively giving the ATTACKER "free" CVP! (Although it's likely that the DEFENDER's DR of "2" will also eliminate the ATTACKER's units.)

EX: a German ATTACKER 4-6-7 and a Russian DEFENDER 4-4-7 are in normal CC. Neither side is Pinned or otherwise restricted. The odds, therefore, are 1:1 for each side. The German player rolls his CC dice first, and rolls a "3", sufficient to eliminate the Russian unit *even if* the Russian player rolls a "2" and generates a Leader (which would retroactively change the German odds to 1:2). If the Russian player rolls a "12", the German squad may Withdraw even though it has already rolled its CC attack. Of course, if the Russian player rolls a "4" or less, the German squad is eliminated also.

If the German player rolls a "4" and the Russian player rolls a "2", the Russian must check for Field Promotion. If no leader is generated, the Russian unit is still eliminated and therefore may not withdraw (despite having rolled a "2"). If a leader *is* generated, the odds change to 1:2 for the German, and a "4" becomes only a Casualty Reduction. The Russian player must use Random Selection to see which DEFENDER unit suffers the CR and only the *survivors* have the option of withdrawing. Of course, with a DR of "2", the Russian has eliminated the German squad regardless.

[12.22] Is "No Quarter" always applied to both sides when in effect?

Not at all. One side may have "No Quarter" in effect for them while not at all for the other side. There are certainly situations where NQ may *automatically* be in effect for both sides (e.g., RB; late-war Japanese) but if not so specified NQ is always optional for each side.

[12.23] Must I use my MGs when making a SFF attack?

A8.3 says that *if* the MGs are used they are treated as Sustained Fire etc. This is not always desirable, so it would be good if you had the choice to not use them. Many people think that there *is* no choice, but they're mistaken: they only read the first half of the sentence ("... it must use all usable MG/IFE in its possession ...") while ignoring the second half ("... or forfeit their use for the remainder of the Player Turn ...").

EX (1): you have a squad with a MG that has already First Fired (i.e., the MG has lost ROF). An enemy unit sidles up within normal range. The squad can SFF its inherent FP; *if* it decides to use the MG as well, the MG is subject to Sustained Fire penalties. If it *doesn't* use the MG, it can't later change its mind and decide to use it after all later in the MPh/DFPh.

EX (2): As above, except the MG still has ROF. The only difference is that the player now has a choice between using the MG alone (at normal FP, no penalties), or using SFF from the squad; if the latter, whether or not the squad decides to use the MG as well, it still loses any remaining ROF and is marked with Final Fire etc.

EX (3): As above, except the possessing unit is a HS or Crew. The only difference is that the MG FP and the inherent FP can't be used together. The HS could First Fire its inherent and SFF the MG if it wants; or the other way around; or just continue to only use its inherent, or only use the MG.

The overall exception is FPF (A8.31), where all usable MG/IFE weapons *must* be used (as Sustained Fire, since the possessing unit is already marked with Final Fire) regardless of their prior status.

So what difference does this all make? Only that it means if you want to Final Fire, you can't Final Fire your MG and then later on Final Fire your inherent (or vice versa); Final Fire means what it says: do it now, or don't do it at all. Barring FPF, there will be no second chances.

[12.24] OVRs confuse me! How can it be made simpler?

I'm glad you asked! What you need to do is buy the ASL Action Pack #2; in addition to the scenarios and new boards that it contains, it features an "OVR flowchart" that covers in detail all the steps required to implement an OVR. The chart helps to explain the complex OVR procedure (particularly the target's Defensive Fire options), and after a little bit of practice you should find that the necessary steps are easily implemented (and in the correct sequence too).

The OVR Flowchart is also included in the 2nd Edition Rulebook.

[12.25] Heroic Leaders

While the rules for Heroes and Leaders are fairly straightforward, strange things occur when the two are combined by the creation of a Heroic Leader.

The most common confusion is, "Can a Heroic Leader apply both his Heroic DRM and his Leadership DRM?" The answer is No (see A15.21). This also applies to a "0" leader, since "Leadership" and "Leader DRM" are synonymous terms.

If your Heroic Leader and an MMC advanced into CC, you can attack using EITHER his Hero DRM or Leadership DRM, but not both. Or, if you have a Heroic 8-0 and a MMC in a same-location Firegroup, you can either "be a Hero" and add his 1FP and -1 DRM but risk Cowering, or "be a Leader" and direct the MMC but prevent Cowering.

The other odd thing about Heroic Leaders is that it isn't necessarily a good thing to happen to a Leader if he already has a ML of 9 or more. Their Hero DRM doesn't make them more effective, since they are already at least a -1 in most armies. They are no more likely to pass a MC than before, either, although the fact they can't be Pinned by the MC is a small bonus. But, if they ever do fail a Morale Check, they Wound rather than Break - and risk being eliminated instantly by the Wound dr. If they do survive, but then fail another MC at any time, they are automatically eliminated by A15.2 - a broken Leader who fails a MC at least gets a Wound dr! On the upside, a Heroic Leader is always Good Order, but whether this is adequate compensation for being easier to be KIA'ed is debatable.

[12.26] Half-Squads and Smoke Grenades

Half-squads may NEVER use Smoke Grenades. A24.1 is quite clear: "SMOKE placement may be attempted ... by any Infantry *squad* having a Smoke exponent ..." [emphasis added]. Half-squads are not squads, nor do they have Smoke exponents, so they may not use Smoke Grenades.

H1.22 is sometimes cited as giving Assault Engineer HS the capability of using Smoke Grenades, since it increases their Smoke exponent by 2, "even if 0." However, a Assault Engineer HS is still not a squad, so A24.1 prevents them from using their Smoke exponent. Nor can two (or more) HS stacked together throw Smoke Grenades; they may be the same size (or larger) than a squad, but they are still not a squad!


INTRODUCTION PART 1 PART 2 PART 3 PART 4 PART 5